Dust Collection Systems

Other Detail:

• Type of blower fans: Backward curve/backward straight/Radial/Radial straight/open type/Peddle type Aerofoil /Forward curve
• Capacity: 5000 CMH TO 30000 CMH
• Pressure: 25 mm to 1500 mm wg
• Diameter: 10” to 96”
• RPM: 450 TO 2880
• Frequency: 60 Hz
• Voltage: 380/400/110
• Phase: 3 phase/ I phase
• Type of drive: Direct/V-belt/Coupling/Plug type/Engine driven
• MOC: MS/SS ALL Grade/Aluminum/GI/PP/PP+FRP/PP+PVDF/FRVE/MS + Rubber lined
• Coating: HR coating/Powder coating/Hallar coating/PP/PVDF/PTFE/ETFE/FEP
• Type of mounting: Floor mounted
• Inlet temperature: 40 deg to 600 deg C
• Motor rating: 0.25HP to 300HP

A Fume Exhaust System is used to capture these gases, dusts, mists and metal fumes in a work process. These systems help eliminate or lower human exposure to hazardous fumes.

It consists collection hood, ducting, air cleaning device and blower and an effective fume extraction System can carry away airborne contaminants before they can be breathed in.

United Airtech offers a wide variety of fume and smoke extraction systems especially where worker's protection is needed against contaminated and hazardous environment.

We can provide individual/centralized Fume Exhaust Systems as per site requirement. Suitable ducts/hoods are provided where necessarily to effectively remove toxic/offensive gases there by providing clean atmosphere inside the department.

Other Detail:

• Type of blower fans: Backward curve/backward straight/Radial/Radial straight/open type/Peddle type Aerofoil /Forward curve
• Capacity: 5000 CMH TO 30000 CMH
• Pressure: 25 mm to 1500 mm wg
• Diameter: 10” to 96”
• RPM: 450 TO 2880
• Frequency: 60 Hz
• Voltage: 380/400/110
• Phase: 3 phase/ I phase
• Type of drive: Direct/V-belt/Coupling/Plug type/Engine driven
• MOC: MS/SS ALL Grade/Aluminum/GI/PP/PP+FRP/PP+PVDF/FRVE/MS + Rubber lined
• Coating: HR coating/Powder coating/Hallar coating/PP/PVDF/PTFE/ETFE/FEP
• Type of mounting: Floor mounted
• Inlet temperature: 40 deg to 600 deg C
• Motor rating: 0.25HP to 300HP

A dust collection system is an air quality improvement system used in industrial, commercial, to improve breathable air quality and safety by removing particulate matter from the airand environment. Dust collection systems work on the basic formula of capture, convey and collect. 
First, the dust must be captured. This is accomplished with devices such as capture hoods to catch dust at itssource of origin. Many times, the machine producing the dust will have a port to which a duct can be directlyattached. Second, the dust must be conveyed. This is done via a ducting system, properly sized and manifolded to maintain a consistent minimum air velocity required to keep the dust in suspension for conveyance to the collection device. A duct of the wrong size can lead to material settling in the duct system and clogging it. Finally, the dust is collected.This is done via a variety of means, depending on the application and the dust being handled. It can be as simple as a basic pass-through filter, a cyclonic separator, or an impingement baffle.It can also be as complex as an electrostatic precipitator, a multistage baghouse, or a scrubber.